Happy time bidet

HAPPY TIME BIDET is designed to be easily installed on your current toilet. All the parts and tools necessary for installation are supplied in a package.

Features

• Easy to install
  Can be easily installed to your current toilet bowl.
  NO PLUMBER REQUIRED!!
  
  
• Warm and cold water
  Connects directly to the water supply pipes in your bathroom; Temperature and water pressure adjustable.
  
  
• Strong but smooth water spray
  Water spray contains a lot of air bubble, so you can wash your bottom with strong but smooth water spray.
  
  
• Non-electric device
  No electricity is used, so it can be used by all members of family even in a wet condition.
  
  
• Retractable nozzle
  When not used, the nozzle is retracted and not exposed. Therefore, it can always be kept clean.
  
  
• DRAIN knob
  Removes the cold water left in the hot water supply pipe, so you can enjoy warm water spraying immediately.
  
  
• No maintenance required
  Composed of bronze parts and plastic body, so corrosion or failure does not occur. Can be easily cleaned.
  
  

How it works

• Designed as DO-IT-YOURSELF product, installed on your existing bathroom toilet.
  
• Water sourced directly from your hot and cold water pipes.
  
• Water pressure and temperature simply adjusted.
  
• After your every toliet activity, wash your private area with water!!
  

How to install

1. Turn off the hot and cold water valves on the wall-mounted water valves under your bathroom sink.

2. Use the Large Wrench to remove the existing pipelines (flexible or straight hose) that are connected to the water pipes. Join the Adapters between the Flexible Hoses and the water valves.

3. Remove the toilet seat from the stool. Join the Anti-slip Rubbers, Bidet Body, Support Plates, and the toilet seat.

4. Cut the White Tube into two, and then connect them to the Adapters and the Bidet Body, respectively.
CAUTION: Be careful not to mix up the hot and cold connections.

How to use

1. Open the DRAIN knob to remove the cold water left in the hot water pipe.
   
   
2. Close the DRAIN knob, and set the appropriate temperature by turning the TEMP knob.
   CAUTION: If you set the TEMP knob to the highest temperature, it might be too hot. It is recommended to set it to a midiium temperature and then gradually raise it.
   
   
3. Slowly open the WASH knob to start washing.
   CAUTION: It is better to start with a low water pressure.
   
   
4. Wipe the water off with toipet or a towel.